راهنمای استفاده از OpenWRT

استفاده از access point های ارزان قیمت در بسیاری از دفاتر کوچک و منازل مسکونی رایج شده است. رنج وسیعی از این تجهیزات با استفاده از مشتقات لینوکسی (OpenWrt TableOfHardware) و به خصوص OpenWRT کار می کنند.
O’ReillyNet مقاله خوبی برای آشنایی با  OpenWRT منتشر کرده است که پیشنهاد می  کنم مطالعه کنید:



OpenWRT 101

OpenWRT is one of the key drivers
behind the Wi-Fi revolution. It got its start as an embedded Linux platform
for wireless routers, perhaps inspired by (while separate from) the GPL’d
Linksys code, and since 2004 it has been managed as an open source project.

There are currently three major
active branches of the OpenWRT platform: OpenWRT, FreeWRT, and DD-WRT.
OpenWRT is the original code base, which focuses on a minimal embedded Linux
platform with a number of modules to add various functionalities. FreeWRT is
a direct outgrowth of OpenWRT and focuses on providing an advanced platform
for experienced developers. DD-WRT started with Sveasoft Alchemy but
switched over to a WRT kernel to make use of commodity access points from
companies like Linksys and Netgear as opposed to high-end APs. DD-WRT has a
nice control panel and some other features for easy setup and use. (Ewrt is,
alas, no more, so I won’t describe it here).

یکی از نقاط قوتی که براین این به روز رسانی می توان در نظر گرفت، امکان استفاده از  ماجول های امنیتی علاوه بر استاندارد بسیار نامطمئن WEP است. با استفاده از راهنماهای  موجود WPA (و شاید  WPA2) در دسترس می باشند. همانطور که حتما می دانید  استاندارد  WEP به روش بسیار خوبی برای در اختیار قرار دادن اطلاعات شما به نفوذگران (lamerهای  خوش حال) تبدیل شده است.

دیدگاه‌ خود را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

پیمایش به بالا